Product Advantages
Bifacial modules Smart choice
Synchronous multi-point drive
Control system low power consumption
High slope adaptability ≤20% N-S slope
Easy to install
Optimized cost
| Tracker Specifications | |
| Tracking Type | Independent horizontal single-axis tracker |
| Tracking Range | ±60° |
| Drive Type | Single point drive, 24VDC motor |
| Bracket length | Up to 50m |
| Foundation Options | Ramming piles/Cast-in-place concrete piles |
| Terrain Flexibility | ≤20% N-S slope, E-W slope has no effect |
| Structure Material | Hot-dip galvanized steel / Pre-galvanized steel / Zn-Al-Mg coated steel |
| Standard Design Wind Speed | ≤28m/s(EN, 10min) |
| Operation Temperature Range | -35℃ to 70℃ |
| Special Protection Mode | Wind Stow (15°), Snow Stow (45°), Flood Stow (0°), Hail Stow (60°) |
| Protection Wind Speed | 18m/s (3s gust,MRI=50) or 12m/s(EN 10min) |
| Electronic Controller Specifications | |
| Control System | 1 controller per tracker |
| Control Algorithm | Astronomical algorithms + Tilt sensor closed-loop control |
| Tracking Accuracy | ≤ 2° |
| Control method | MCU |
| Monitoring system | SCADA (Optional) |
| Communication Options | Wire / wireless |
| Protection level | IP65 |
| Controller's Power Supply | Power supply from inverter back end (AC) power supply from inverter front end (DC) /factory power supply (AC) |
| Control system energy consumption | 0.02KWh |
| Warranty | 5 yr drive and control + 10 yr structure |
Support
Ready to Start Your Project?
Get a Quote
Tell us your site conditions, capacity needs, and timeline – our engineering team will respond within 24 hours with a customized solution and quotation.